Shark PowerDetect UV Reveal vs Shark PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base

Quick take: The Shark PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base costs $530 less; the Shark PowerDetect UV Reveal runs longer per charge (180 vs 120 min).

Which one to buy

Newer and better equipped, the Shark PowerDetect UV Reveal beats its older sibling on nearly every line, though it now costs $530 more. At $1,300 it adds a camera to LiDAR, a UV light that finds dried spills and sticky residue, a 185°F pad wash with 175°F heated drying, a 180-minute rating against 120, a 379 ml bin against 284 and a 2-year warranty against 1. The PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base, at $770, washes without heat, and its owners say the pad dries poorly and can turn sour.

Testing backs the UV Reveal's headline feature: stain-hunting passes cleared residue invisible under normal light, and it avoided 20 of 24 test objects, Shark's best result. The 2-in-1's owners say obstacle avoidance still misses small objects. Both vacuum well; 2-in-1 owners in multi-pet homes rank it highly for pet hair, and the UV Reveal tested at 91.5% on pet hair.

The UV Reveal's problem is water. It puts down far more than average, and floors stay visibly wet for 30-plus minutes. It also stands 4.1 inches tall, failed a 25mm threshold in testing, needs a large dock, and launched in March 2026 with little owner history yet. Its app has no mop zones, room settings or multi-floor maps. That last gap is the one real reason to choose the 2-in-1, which supports multiple floors, though its owners also find its app thin and its maps prone to resetting.

In a single-floor home the UV Reveal is the better robot if the extra $530 fits. In a multi-story home the older 2-in-1 is the only one of the two that maps each level, and its owners say it is worth buying only at a solid discount.

Shark PowerDetect UV Reveal

For single-floor, hard-floor homes with pets or kids who leave sticky messes, and owners who can tolerate wet floors after mopping.

Shark PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base

Only the better choice in a multi-story home, since it maps more than one floor; vacuum-first buyers will get the most from it.

SpecShark PowerDetect UV RevealShark PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base
Price~$1,300~$770
TypeRobot Vacuum & MopRobot Vacuum & Mop
SuctionNot disclosedNot disclosed
Battery180 min120 min
NavigationLiDAR + CameraLiDAR
Filtration—Anti-Allergen Seal (99.97% at 0.3 microns)
CordlessYesYes
Bagged——
Noise78 dB—
Dustbin379 ml284 ml
Water tankNot disclosed—
Self-empty dockYesYes
Auto mop washingYesYes
Hot water washingYesNo
Obstacle avoidanceYesYes
Carpet detectionYesYes
Auto mop liftingYesYes
Multi-floor mappingNoYes
App controlYesYes
Dimensions13.8 x 13.8 x 4.1 in—
Weight27.4 lbs (with base)—
Warranty2 years1 year

Pros & cons

Shark PowerDetect UV Reveal

  • ✓First-of-its-kind UV Reveal light exposes invisible biological and sticky messes, triggers stain-seeking mode, and verifies removal before moving on
  • ✓HyperSonic mopping applies up to 7x the scrubbing power of Shark's earlier Matrix mopping on targeted stains
  • ✓Best obstacle avoidance Vacuum Wars has ever measured on a Shark - it dodged 20 of 24 test objects using NeuroNav AI with LiDAR, RGB camera, and 3D sensors
  • ✓Strong vacuuming in testing with an 88% carpet deep-clean score and 91.5% pet hair pickup
  • ✓Bagless NeverTouch Pro base holds about 60 days of debris with washable filters (no bags to buy), washes the mop at 185°F, and dries it at 175°F
  • ✗Mopping uses an unusually large amount of water, leaving floors noticeably wet and producing one of Vacuum Wars' lowest combined mopping scores
  • ✗Tall 4.1-inch profile can't fit under low furniture, and threshold climbing tops out around 1 inch
  • ✗App lacks mop zones, room-level cleaning controls, and multi-floor mapping
  • ✗Early owner ratings diverge widely (4.7/5 from 34 Best Buy reviews vs 3.3/5 on Shark's own site); the 3.9 rating and ~200 review count here are honest estimates from a thin post-March-2026 review base

Shark PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base

  • ✓NeverTouch Pro base empties the bin and washes/dries the mop pad automatically for up to 60 days
  • ✓360-degree LiDAR plus a 3D sensor for mapping and obstacle detection
  • ✓Floor Detect automatically lifts the mop pad and avoids carpet while mopping
  • ✓Up to 2 hours of runtime in dry vacuum mode on hard floors
  • ✓Precision Grid Mapping supports multi-floor homes
  • ✓Full app control with scheduling, no-go zones, and voice assistant support
  • ✓Several hundred dollars cheaper than the ThermaCharged NeverTouch Pro tier
  • ✗Shark's own published customer rating on this model sits in the low-3s out of 5 — read current reviews before buying
  • ✗No heated sanitizing wash, unlike the pricier ThermaCharged NeverTouch Pro already in this catalog
  • ✗Only a 1-year standard warranty (2 years on parts)
  • ✗No published suction figure to compare against competitors
  • ✗Shark does not publish independent robot-only weight/dimensions separate from the base station, so both are left unlisted here rather than guessed

Shark PowerDetect UV Reveal vs Shark PowerDetect 2-in-1 Robot Vacuum and Mop with NeverTouch Pro Base: common questions

Does the Shark PowerDetect UV Reveal's stain light make it worth choosing over the 2-in-1 NeverTouch Pro?▾

It is a real feature. Testers found the UV Reveal maps residue invisible under normal light, washes its pad and returns for targeted scrubbing until it is gone. The 2-in-1's mopping is rated merely adequate by its owners, with no stain hunting at all.

Why do floors stay wet after the Shark PowerDetect UV Reveal mops?▾

It lays down several times the typical amount of water, and testing found floors stayed visibly wet for more than 30 minutes. Stain removal is excellent, but in homes with rugs next to hard floors that standing water can leave soggy edges.

Can either the Shark UV Reveal or the PowerDetect 2-in-1 NeverTouch Pro map multiple floors?▾

Only the PowerDetect 2-in-1 with NeverTouch Pro Base supports multi-floor mapping. The UV Reveal's app lacks it, along with mop zones and room-specific settings, so it suits single-level homes best.