How much better is the suction than budget rivals like the Eufy C10?

Substantially better - independent testing measured 2.24 kPa of sealed suction versus the Eufy C10's 0.73 kPa, more than three times as strong, and among the highest scores recorded at this price point. It's the single biggest reason this model gets recommended over other budget LiDAR bots.

Is the mopping actually useful, or just a checkbox feature?

Treat it as a bonus rather than a real mop replacement. The single pad requires manual washing, doesn't lift when it crosses carpet, and uses about double the average water while still leaving streaky results in testing. Anyone who wants mopping to be a serious feature should look at a higher-tier combo bot instead.

What does the "+" get you over the base Q7 M5?

The M5+ adds the auto-empty dock with a 2.7L disposable bag rated for roughly seven weeks of use. The base M5 has the same vacuuming and navigation hardware but requires manually emptying the dustbin after every run.

Does it handle pet hair well?

Reasonably, but not exceptionally - testing measured about 79% pickup of flattened pet hair, which is roughly average for the category despite the unusually strong raw suction numbers. Long hair also tangles slightly more than average around the brushroll despite Roborock's redesigned comb.

Does it have obstacle avoidance?

No - there are no cameras or structured-light sensors for obstacle detection, so cables, socks, and toys need to be cleared before each cleaning run to avoid the robot getting stuck or dragging debris.

How does it compare to the Roborock Q7 L5?

The M5+ has meaningfully stronger suction (2.24 kPa vs. the L5's 1.95 kPa) and a far better pet-hair pickup rate, while the L5 offers better battery efficiency and slightly better carpet debris removal. In side-by-side testing the L5's pet hair performance was called the worst score on record for the category, so the M5+ is the safer pick for anyone with pets.

Robot Vacuum & Mop

~$250

Roborock

Roborock Q7 M5+

Name: Roborock Q7 M5+
Brand: Roborock
Price: 250 USD
Availability: InStock

Q7 M5+ is the direct successor to Roborock's old Q5 Max+ - Amazon's own listing literally calls it "upgraded from Q5 Max+" - and it's the self-empty entry point into Roborock's current Q-series. 10,000 Pa in Max+ mode is genuinely strong for a sub-$300 self-empty bot, and the RockDock Plus auto-empty dock is rated for about 7 weeks between bag changes with its 2.7L bag. PreciSense LiDAR with 360° scanning gives real multi-floor mapping, and the Carpet Boost strategy bumps suction automatically when it detects a rug. Where it's noticeably behind Roborock's pricier Qrevo and Saros lines is mop handling: this one has a detachable mop module you swap in, not an auto-lifting mop that senses carpet and lifts itself out of the way. There's no mop washing or hot water cycle in the dock either - it's vacuum-first with mopping as a bolt-on, not a true all-in-one. For the price, the suction number and self-empty dock are the real draw; just don't expect Qrevo-level mop automation.

Approx. price

~$250

Suction

10,000 Pa

Navigation

LiDAR

Best For

Strong suction and self-empty on a budget, mopping as a secondary feature

Check price on Amazon →

We may earn a commission. Price and availability on Amazon’s site may differ.

Specifications

Navigation

LiDAR

Suction Power

10,000 Pa

Self-Empty Station

Yes

Auto Mop Washing

Obstacle Avoidance

Yes

Carpet Detection

Yes

Auto Mop Lifting

Multi-Floor Mapping

Yes

Type

Robot Vacuum & Mop

Dustbin Capacity

2.7 L

App Control

Yes

Dimensions

12.8 x 12.8 x 3.9 in

Weight

11.35 lbs

Warranty

1 year

Model

Q7 M5+

Highlights

10,000 Pa self-empty vac under $3007-week auto-empty dockSuccessor to the Q5 Max+

Pros

✓10,000 Pa suction is strong for a self-empty bot under $300
✓RockDock Plus auto-empty dock rated for about 7 weeks per bag
✓PreciSense LiDAR with 360° scanning and multi-floor mapping
✓Carpet Boost automatically increases suction on rugs
✓1-year warranty with paid extended-warranty options available

Cons

✗Mop is a detachable module, not an auto-lifting mop that senses carpet on its own
✗No mop washing or hot water cycle in the dock - vacuum-first, mop as an add-on
✗Roborock doesn't publish battery runtime or noise level for this model
✗Water tank capacity not disclosed

Owner Insights(35 discussions)

The Roborock Q7 M5+ has built its reputation on one thing above all else: suction that punches well above its price class. Independent lab testing measured sealed suction more than three times higher than the Eufy C10 and among the strongest ever recorded at this price tier, which is why it keeps coming up in budget LiDAR robot vacuum comparisons as the pick for anyone who cares more about raw cleaning power than mopping polish.

Day to day, that suction translates into strong real-world debris pickup on both hard floors and carpet, helped by automatic suction-boost detection when it crosses onto rugs, and the LiDAR navigation is efficient enough to clear over 1,000 sq ft on a single charge. The auto-empty dock's 2.7L bag stretches to about seven weeks between changes, so hands-on maintenance stays minimal. Where it falls short is mopping - the single pad needs manual washing, doesn't lift on carpet, and uses roughly double the average water while still leaving mixed results, so anyone buying this specifically to replace mopping duty will be disappointed. Hair tangling and pet-hair pickup are both roughly average rather than a strength, and there's no obstacle avoidance, so pre-clearing the floor is part of the routine.

This is the right buy for someone prioritizing vacuuming performance on a budget who treats the mop as a bonus feature rather than the main event - it's a clear step up in suction from the Eufy C10 for a similar price. Buyers who want mopping to actually replace a manual mop, or who need obstacle avoidance to skip pre-tidying, should look at Roborock's own step-up Q7 Max+ or a dedicated mop-focused combo instead.

Pros

+Suction is the standout feature at this price - independent lab testing measured 2.24 kPa, more than triple the Eufy C10's 0.73 kPa, putting it among the 12 highest suction scores ever recorded by the reviewer
+Top-mounted LiDAR navigates efficiently, clearing about 0.83 m² per minute versus a 0.70 average, and covers roughly 1,060 sq ft on a charge
+The auto-empty dock (the "+" over the base M5) uses a 2.7L disposable bag rated for up to seven weeks between changes, so day-to-day maintenance stays low
+Carpet cleaning is a genuine strength, with automatic suction boost detection kicking in on rugs
+App covers scheduling, no-go/no-mop zones, room-specific settings, and adjustable mop water levels - full-featured for the price tier
+Owners consistently frame it as punching above its price bracket on raw cleaning power, which is the main reason it gets recommended over pricier LiDAR bots for hard-floor and carpet-heavy homes

Cons

−Mopping is the weak link - a single detachable pad has to be washed by hand, there's no mop-lifting when it hits carpet, and mixed-floor homes end up running separate vacuum and mop passes
−It uses roughly double the average water during mopping yet still leaves floors looking streaky, undermining the mop feature as a real carpet-vs-hard-floor solution
−Hair tangling is slightly worse than average (43% vs. a 38% average) even with the newer "jaw scraper" comb design on the brushroll
−Pet hair pickup is only average (79% of flattened hair) - solid but not a standout given how strong the suction numbers otherwise are
−No obstacle avoidance sensors, so floors need to be tidied before each run or the robot can snag on cords and small objects
−Battery efficiency runs below average per charge (about 1.18 minutes of runtime per battery percent), so absolute runtime is fine but efficiency lags LiDAR rivals